Products

Continuous improvement in quality cost and customer services
MDPE Pipes

MDPE Pipes

Inherent characteristics of MDPE such as corrosion crack resistant, tough and flexible makes polylthylen piping system the most preferred means for transportation and distrbution of waters, potrol and natural gases wordwide.

Material:

The raw material used is Medium Density Polyethylene (MDPE) Advika Pipes Industries manufactures pipes in graces PE-30 & PE-100 for water gas applications in sias 20 mm lo 250 mm (Outer Diameter in all pressure ratings. Traditionally these pipes are identified by its color for different uses like blue for waler orange for petrol and yellow for gas line,

Specification:

Advika Pipes Industries manufactures MDPE pipes which confirms to National and International standards as 150 4437,150 4427,15 1488C-2001, 85-7281 DIN 80/4/75 Advika Pipes can also be tailor made to meet the specification requirement of individual gas authority of customers.

Specification:
Flexible : Easy to handle
Corrosion Resistant : Tough and highly reliable in aggressive solid
Fusion Joints : High integrity and reliability
Light Weight : Lighter in weight as compared to metal pipes
Crack Resistant : Excellent resistant to subsidence, traffic vibrations point leading and marshy ground
Homogenous : Leakage free joints
Installation : Low installation cost
Nominal wall Thickness (All size in mm)
Sr. No. Outer Dia mm SDR 17.6 SDR 13.6 SDR 11.0 SDR 9.0
1. 16 2.3 2.3 3.0 3.0
2. 20 2.3 2.3 3.0 3.0
3. 25 2.3 2.3 3.0 3.0
4. 32 2.3 2.3 3.0 3.6
5. 40 2.3 3.0 3.7 4.5
6. 50 2.9 3.7 4.6 5.6
7. 53 3.6 4.7 5.8 7.1
8. 75 4.3 5.5 6.8 8.4
9. 90 5.2 6.6 8.2 10.1
10. 110 6.3 8.1 10.0 12.5
Physical & Mechanical Properties of MDPE Pipes :
Sr. No. Characteristics Units Requirements Test Parameters Test Methods
1. Conventional Density Kg/m3 >930 (base polymer) 230°C ISO-1183, ISO-1872/1
2. Melt Flow Rate G/10 min 0.1-1, 1 190°C / 5kg ISO-4440/1, IS 2530:1963
3. Thermal Stability Min >20 200°C ISO / TR-10837
4. Hydrostatic h Failure time> =100h
Failure time> =165h
Failure time> =1000h		 PE-80-9.0 MPa -20°C
PE-80-4.6 MPa -80°C
PE-80-4.0 MPa -80°C		 ISO-1167
5. Elongation at Break % >=350 - ISO-6259 / 3